Removal of the existing caulk, professional prep of the surface, repair to minor damage, an 8-layer resurface in the color of your choice, a re-caulk around the perimeter of the tub, and our 2 year non-transferrable warranty.
Bathtub Resurfacing
Long Lasting, High-Quality Bathtub Restoration
Custom Tub and Tile’s bathtub surface restoration in Maryland exceeds industry standards to give homeowners all over the DMV area eight durable layers of long-lasting protection on top of the original bathtub’s substrate. By using advanced mechanical and chemical bonding processes, we are able to provide one of the longest warranties of any bathtub resurfacing company. In addition, our technicians provide consistently impeccable workmanship which results in a new surface that is polished and professional and able to stand up to everyday wear and tear.
Dynamic Results for All Styles of Bathtubs
No matter what kind of bathtub you have, if you’re interested in resurfacing your tub in Maryland, Custom Tub and Tile is the company to call. Our eight-layer resurfacing system will leave your tub with a beautiful, shiny surface, and you can use your tub the next day. Our in-house trained technicians specialize in standard tub resurfacing and focus on the very best customer service. They will leave your home looking better than when we arrived.
Custom Tub and Tile offers resurfacing in a variety of shades, so we can match your desired bathroom décor. The results of our bathtub resurfacing service looks so good it may even make your friends and family think you remodeled your bathroom.
We resurface more than standard size tubs! What does your tub look like?
Corner Bathtubs
Like oval bathtubs, these luxurious bathtubs are the same length as any other standard tub, but they are wider — in this case, even wider than an oval bathtub. In fact, they are basically square bathtubs at five feet by five feet, although one corner of the square is rounded off. Once again though, it will cost significantly more to resurface a corner bathtub than an alcove bathtub, as there is considerably more square footage. However, if you’re going to go through the expense of having a corner bathtub, you probably appreciate comfort and luxury when bathing, and if you’re going to have a luxurious tub, it should look great, too.
Alcove Bathtubs
Alcove bathtubs usually run about four to six feet long and 15 to 32 inches wide. An alcove is a space bounded by three walls, and similarly, an alcove tub is usually one up against the back wall, for example, with the long side walls on each side forming the other boundaries of the tub. This is a fairly common bathtub configuration. A standard alcove bathtub will usually be closer to five feet long. Four feet is fairly small and usually only found in very small bathrooms where only a shower is not sufficient, while a six-foot tub may be too large for many standard bathrooms.
Free-Standing Bathtubs
These bathtubs, which can go anywhere if you’ve got the room for them, can be anywhere from a little over four feet to as much as six feet in length, and from 24 inches to 32 inches in width. When thinking about standard tub resurfacing, you will also want to consider the height of the tub, which is usually around 20 inches, except for free-standing bathtubs which may run four to 10 inches taller.
Jacuzzis
A Jacuzzi, or whirlpool tub, usually fits in between the alcove and oval when it comes to width, at about 32 inches. It contains jets that create a soothing water feature in any bathroom. When resurfaced the jets and fixtures are protected by our skilled technicians.
To experience the benefits of Custom Tub and Tile standard bathtub resurfacing in your home, to ask any questions or to request a free estimate, contact Custom Tub and Tile today.
Get Started8 Layers Above the Competition
Bathtub refinishing is a great choice to transform the look of your existing tub. Our high gloss, durable coating will renew your outdated surface in a matter of hours, so you can use your tub the very next day. We also excel at rusted tub repair in Maryland, which involves resurfacing cast iron or pressed steel enamel tubs. When cast iron or steel bathtubs are made, manufacturers coat them with a porcelain veneer that, after time, erodes to expose the original casting. When water and steel or iron interact regularly, rust inevitably forms.
Not only is rust unattractive and hard to remove, it can be hazardous to your health, exposing you to abnormally high lead levels. Our bathtub refinishing process in Maryland involves cleaning the surface of mineral deposits, soap scum, and rust by using the latest industrial cleaners and power sanders. An industry-strength waterproof filler is then applied to seal the surface and prevent water from infiltrating affected areas. Finally, our technicians coat your bathtub with a protective, catalyzed primer that sets within minutes.
Frequently Asked Questions
In addition to white, Custom Tub and Tile offers three off-white shades — almond, bone and biscuit — as well as the ability to color match almost any color. Simply provide us with the color number from any paint store and we will match it, so you can continue enjoying your existing bathroom décor.
Call us today at (240) 668-4208 to take advantage of our free quote offer . Custom Tub and Tile Resurfacing also provides countertop resurfacing, tile resurfacing and sink resurfacing services to save you money on upgrading your home.
Chances are, yes! Rust mostly occurs around the drain and overflow plate which can be repaired. While we cannot fully inhibit the rust from forming once it has started our process can slow it down. Our trained technicians use a combination of acid etch and elbow grease to remove the affected metal. The acid etch eats away at the rust which leaves the bare metal exposed and ready for the new surface, and the technician sands away and rust that was not eliminated by the acid etch. Oxidation can severely damage your tub but as long as the structural integrity of the tub is not compromised it can usually be repaired during the tub resurface.
It is important to keep in mind that resurfacing is a cosmetic fix, meaning that some tubs just cannot be repaired. In most cases these are fiberglass tubs or shower pans. Overtime that fiberglass becomes more brittle and flexes and eventually cracks due to pressure from use, structural, or otherwise. If the cracks leak then the tub or shower pan will most likely need replacing. While resurfacing can mask the appearance of the cracks it cannot prevent their eventual return.
Resurfacing, refinishing, and reglazing are essentially all the same thing. It is the act of applying a new surface to a bathroom of kitchen surface to change the color or make it look like new. This option allows the homeowner to revamp their original fixture avoiding a costly replacement.
Our bathtub resurfacing warranty is for 2 years; however, if the surface is properly cared for than the surface could last well over 10 years.
Watch How It’s Done!
Let us take the guess work out of our tub resurfacing service with this behind-the-scenes look at our process; from prepping to application of the coating. This homeowner in Frederick, Maryland had a tub that was in good shape, except the existing coating was starting chip away exposing the original avocado green tub underneath. A couple of hours with our team and now this standard size tub is as good as new!
Check Out Our Blog:
“ 3 Things Resurfacing Can’t Fix ”
It’s no secret that we call bathroom and kitchen resurfacing “the smart way to remodel,” because it gives you all of the benefits of a full remodel without the hassle, mess, or price tag. According to Angie’s List, resurfacing is even estimated at less than half the cost of an average remodel! But what’s the catch? There has to be something… Read More
What will your own resurfacing success story look like?
John’s Resurfacing Success Story
I had a fantastic experience and I think Custom Tub & Tile won my business because of the patience of [their office staff] who responded to probably a countless number of emails…
Read More
Christian’s Resurfacing Success Story
I would recommend Custom Tub & Tile to a friend for a couple of reasons. One, I thought the overall process was actually advertised accurately, which I seldom see…
Read More
Margaret’s Resurfacing Success Story
I decided [Custom Tub & Tile] had the best materials, the best guarantee, and the best price…
Read More
George’s Resurfacing Success Story
I could not have been more pleased. What I liked about [the technician] was that from the moment I met him I had a sense of confidence about his capabilities…
Read More
