Tub Reglazing vs Tub Replacement

An unsightly bathtub can be the bane of any homeowner’s existence. A chipped, stained bathtub can weigh on your mood every day, as well as decrease the value of your home. It beckons your attention every time you enter your bathroom, but the process of replacing it can seem like a burden. The expenses that come with a new tub — such as installation fees, disposing of your old tub and more — cause many homeowners to drag their feet on addressing their old, worn-out bathtub.

And many of them are left wondering: “Do I have to replace my old tub?”

Luckily, replacement isn’t your only option. You actually have a few options when it comes to revamping your unappealing bathtub. Yes, you can opt to replace it. You can purchase brand new bathtub for as little as $200 — but that option comes with quite a few additional expenses. There’s also the appealing option of tub reglazing.

Let’s take a closer look at the tub replacement versus tub reglazing debate, so you can choose which option is best for your situation.

What’s Involved With a Bathtub Replacement?

Many hidden costs come with bathtub replacement. It’s wise to consider everything involved with a bathtub replacement before you decide what to do about your grimy old bathtub. Here are a few questions to consider:

• Can you physically remove the old bathtub yourself?
  • If not, you’d likely have to hire a crew to remove it for you. Gauge the weight of your tub, and make sure you can safely remove it from your bathroom. Plastic tubs can weigh as little as 50 pounds, but the dimensions could pose a problem for removal, and cast iron tubs could weigh as much as 1,000 pounds.
• Will the old bathtub fit out of the bathroom door and another door to exit your home?
  • It’s also important to measure your old tub and the new replacement tub, as well as the doors you’ll use to enter and exit your home. Oftentimes, an old tub will need to be cut into pieces for removal from your home.
• How will you dispose of your old bathtub?
  • After you successfully remove your old bathtub from your home, you must properly dispose of it. Americans generate more than 50 million tons of construction and remodeling waste every year. Dumping your old tub in a landfill will add to that waste. You could look into donating it to a good cause, such as Habitat for Humanity, or try to repurpose it as a pond or cooler.
• How will you address the plumbing issues if your new tub’s plumbing doesn’t match the plumbing of your old tub?
  • Tubs are usually suspended in two places by the existing plumbing. When you remove an old tub and bring in a new one, the plumbing fixtures may need to be replaced or adjusted to fit the new model.
• Do you have a plan in place to repair damaged flooring or to replace missing flooring pieces after the new tub is installed?
  • Most tubs are positioned in a corner or an alcove. They’re typically overlapped by flooring and wall finishes so that a watertight seal is created. When you remove the old tub, you will destroy

I think you can agree, purchasing a cheap $200 bathtub could end up costing hundreds or even thousands of dollars when you consider hiring a plumber and contractor and removing your old tub. If you’re planning a full bathroom remodel, you might be open to spending thousands of dollars to replace your old bathtub. But if you’re a cost-conscious homeowner looking for better solutions to address a worn-out bathtub, there are more economical options to consider.

Alternatives to Replacing a Tub

The best alternatives to a complete tub replacement are refinishing it or relining it. Both options add years of life to an existing tub, and come at only a fraction of the cost of a full tub replacement. Let’s take a closer look at the two options.5-wall-unit-cost

Option #1: Tub Relining

You can opt to reline your old bathtub with a tub liner, which is an insert made of molded acrylic. This option is only available for cast iron and steel tubs. It won’t work for your old acrylic tub.

If you decide to go this route, a professional will come to your home and measure your old bathtub and take photos. He or she will send this information to a manufacturing facility that will create your insert. In a few weeks, the insert will be delivered and installed.

Here are the advantages and disadvantages of opting for a tub relining:

• Advantages: You can enjoy a fresh look without the hassle and cost of a full tub replacement. You can also order a matching wall system with shelves and storage areas, which will add to the function of your tub. This is an excellent option if the walls surrounding your bathtub need a facelift as well. Liners are easy to clean and extremely durable, so you can use almost any type of cleaning agent without worrying about harming the liner.
• Disadvantages: Tub liners are a vanity approach to a worn-out bathtub. Liners cover up problems — they don’t provide a solution. If you have an existing moisture problem around your bathtub, a liner won’t fix the underlying problem. If you opt for a liner in this situation, you would seal the moisture issue under the acrylic liner, which would eventually cause further issues. You should take extra care to hire a trusted professional if you opt for a tub liner. Unless the installation is perfect, water could collect between your old tub and the new liner, resulting in mold and mildew.

You can expect to pay between $1,100 and $1,400 for a tub liner, and even more if you plan to install a wall unit with shelving as well.

Option #2 Tub Refinishing

You can find DIY kits for refinishing your tub, but most professionals advise against this option. DIY tub refinishing requires you to apply a special chemical coating using a brush or roller, which can leave you with a painted, unprofessional finish instead of the refinished look you desire.

With a professional tub reglaze, an experienced technician will sand the old tub, completely removing the existing finishing. He or she will also fill in any cracks or chips, and apply a new coating with a sprayer. This is completed in several stages, and the result will be a fresh, glossy and smooth surface.

Here are the advantages and disadvantages of tub reglazing:

• Advantages: The cost of tub reglazing is lower than the cost of a full tub replacement or the cost of a new liner. The average cost is about $452, according to Angie’s List. A refinished bathtub can last for about 20 years if you care for it properly, which can be longer than the lifespan of a brand-new bathtub.
• Disadvantages: Reglazed tubs require special care, so you should avoid using harsh chemicals to clean a newly surfaced unit. Use only mild, nonabrasive and non-bleach cleaning products. If you aren’t careful, the glossy finish of your reglazed tub could become dull over time, reducing the number of years you enjoy it.

Should I Replace My Bathtub?

If you’re still not sure whether you want to replace your worn-out bathtub or go with one of the alternatives to replacing a tub, consider the following four metrics:

• Cost. Like most homeowners, cost is probably a top concern when weighing the pros and cons of any remodeling project. You can purchase a new bathtub for a few hundred dollars or spend thousands on a top-quality bathtub.

If you opt for a total bathtub replacement, remember that the bulk of the cost will come from additional expenses besides the tub itself. Unless you remove the old tub yourself and install the new unit, you will have to hire someone to remove and dispose of your old tub, as well as install the new one. You might need to hire a plumber to adjust your plumbing fixtures to fit the new unit.

You may also need to hire a contractor to match the flooring in your bathroom and replace pieces or parts that were destroyed during the removal and installation process. If cost is the most important factor in your decision, you should opt to reglaze your bathtub. You will spend the least money and, if you care for it properly, it will last for decades.

• Time. Reglazing a bathtub and replacing your entire bathtub will actually take about the same amount of time — usually no more than three days. There is much more labor involved in a replacement, but there are many stages involved in a reglaze, too. However, if you run into plumbing or installation issues during a full tub replacement, it could take longer.

With a typical reglaze, there’s a waiting period between each stage of the reglazing process. With a replacement, you should expect your bathroom to be out of commission for a few days. With a reglaze, you can use your bathroom — minus the tub — while it’s being resurfaced. If you opt for a new tub liner, it won’t take long to install, but it will take a few weeks to order and receive the new, customized liner.

Keep in mind that remodels often take longer than expected. If a problem arises during a tub replacement, it can easily set you back by a few days — or even longer.

• Labor. If you opt to reglaze your own tub, which we strongly advise against, you can expect to spend many grueling hours on the task. If you opt to replace your own bathtub, it will also be a long and tiresome experience. You might need to rent tools to demolish your old tub, or enlist the help of friends to help you carry and dispose of the old tub.

If you hire a professional to reglaze your tub, he or she will spend time cleaning and sanding your old tub. Then, he or she will apply layers of glaze and then a finish. It will need to dry between layers. If you hire a professional to remove your old tub and install the new one, more labor will be involved to address necessary plumbing, sealing and flooring issues. There is minimal labor involved with installing a tub liner.

• Quality. Many new bathtubs on the market, especially the cheaper options, aren’t of high quality. If you have an older yet well-made bathtub, a quality reglazing will leave you with a beautiful, long-lasting, finished product that’s better than a cheap, but brand-new, tub.

Also, it’s important to remember that not all refinishing options are the same. Be sure to ask about the quality when you’re hiring a professional to reglaze your tub. Companies use different types of coatings and substances for adhesion. Some involve acid and some are acid-free.

The final step in a reglaze — the polishing — will also differ depending on the company you hire. Some companies don’t do high-gloss polishing. If you’re seeking a high-shine option, hire a company that can accommodate your wishes.

When deciding to reglaze or replace your worn-out bathtub, you have many things to consider. If you want to spend thousands of dollars and completely overhaul your entire bathroom, it might be wise to purchase a brand-new tub. If you’re also planning to replace the floor and the plumbing, it may be worthwhile to replace the bathtub during the process.

However, if you’re looking for a cost-effective solution to address a worn-out bathtub, a reglaze is a wise investment. It will increase the value of your home and provide you with a long-lasting bathtub, perfectly customized to your existing plumbing and bathroom décor.

Reglazing: Your Best Option

The experts at Custom Tub & Tile agree that reglazing is among your best solutions for a worn-out bathtub. When you work with a trusted professional with high standards for quality, your old bathtub can be transformed from an eyesore to a brilliant centerpiece of your bathroom.

The team at Custom Tub & Tile will use eight durable layers of long-lasting protection over your old, worn-out bathtub. We will use an advanced, intricate process to clean, sand, bond and polish your tub. The result is a gorgeous, polished bathtub with a like-new appearance — but at a fraction of the cost that comes with replacing your bathtub.

Your durable, refinished bathtub will stand up to everyday wear and tear. We offer a high-gloss durable coating that provides maximum shine, and you can enjoy your tub the very next day. Our process exceeds industry standards, so you can be sure a refinished tub from Custom Tub & Tile is worth the investment. We can transform your old tub, making it look like new without the high price tag.

Contact Custom Tub & Tile

Learn what makes Custom Tub & Tile different from our competitors. We are dedicated to providing honest, worthwhile solutions to your resurfacing needs. Call us at (240) 668-4208 to talk to a knowledgeable representative, or view the many testimonials on our website to learn more about the Custom Tub & Tile difference.

We’re happy to provide you with a free quote and answer any questions you have about bringing new life to your living space.